ADC Kentrox ISDN NT1 1010 Especificações descarregar pdf (Página 168)

100

101

4-38

Reference Guide

Model No.

Running Head

Assigning Time Slots System Configuration and Operation

4.15.1 Modes of Operation

In the 5.x system, the only mode available is

XCON

4.15.1.1 XCON Mode (XCON)

The XCON mode allows the user to cross-connect DS0s to user voice or data cards or to

cross-connect any DS0 on any WAN card to any DS0 on any other WAN card in the system.

The “Mode” setting on a WAN in a XCON system will only indicate the XCON option.

4.16 Assigning Time Slots

You must use a

time slot map

to specify the connections between all incoming and outgoing

lines connected to the system. The time slot map lets you split up your T1 and E1 bandwidths

into portions required for normal voice and data communications. It contains the connections

for all cards in your system.

4.16.1 Assigning a Time Slot to a User Card Port

You can define a time slot map from any user card (data or voice) for connections involving

that card, or from a WAN card for cross-connections involving only WAN cards. For example,

Figure 4-17 shows the E&M Card Main Screen for the time slot assignments. Assign time

slots to a voice card as follows:

1. From the System Main Screen, select the desired voice card and press <Enter>. That

card’s Main Screen appears.

2. Select the WAN port from which you want to assign time slots to the E&M card. In

Figure 4-17, this is

W1-1

(for WAN 1, port

1).

3. Select a time slot (TS) for the first card port. A number appears at the bottom of the

screen for the corresponding time slot on the WAN port.

4. Set the time slot number by using the up and down arrow keys to highlight it, then press

the <Enter> key.

5. Change the STATE of the port from

stdby

actv

6. Repeat steps 2 through 5 for the remaining card ports, to assign time slots to them.

7. Press “

” to save your settings, using the

Save

command in the Card Main Screen.

1 2 ... 163 164 165 166 167 168 169 170 171 172 173 ... 551 552

Comentários a estes Manuais

Sem comentários

ADC Kentrox ISDN NT1 1010 Especificações Página 168

Comentários a estes Manuais

Manuais e produtos relacionados com Redes ADC Kentrox ISDN NT1 1010